Welcome to Gratify International
Empowering Lives
Empowering Lives
Electrical EngineeringElectrical InspectionsCalibration Verification ScopeMechanical CalibrationsConstructionSolar Energy
Services
- Electrical audit
- Energy audit
- Acceptance test of electrical equipment
- Electrical Inspections
- Electrical power distribution
- Standby power system
- Uninterruptible power system
- Lightning and surge protection
- Arc Flash Study
- Power system studies
- Grounding system
- Fire alarm system
- Lighting design
- Intelligent lighting control system
- Digital Earth Tester
- Energy Meter
- Function Generator
- Frequency Meter
- Frequency Counter
- AC/DC Power Supply
- Thermography
- Multi-Function Calibrator
- High Voltage Generator
- Hi-Pot Tester
- Loop Calibrator
- LCR Meter
- Insulation Tester
- Oscilloscope
- Phase Indicator
- Power Meter
- Power Supply Functions
- Resistivity Meter
- RCD Meter
- Tachometer (non-contact)
Services
Insulation Testing
- Insulation Resistance (IR) Electrical Apparatus & System
- Insulation Resistance (IR) value for transformer
- Insulation Resistance (IR) Value for Electrical motor
- Insulation Resistance (IR) Value for electrical wiring and cable
- Insulation Resistance (IR) Value for transmission / Distribution Line
- Insulation Resistance (IR) Value for Panel Bus
- Insulation Resistance (IR) Value for substation Equipment
- Insulation Resistance (IR) Value for Domestic/ Industrial Wiring
- Insulation Resistance (IR) Value for Tap changer
Grounding Inspection (Earthing)
It is critical for facilities to have grounded electrical systems, so that in the event of a lightning strike or utility overvoltage, current will find a safe path to earth. Poor grounding contributes to downtime but a lack of good grounding is also dangerous and increases the risk of equipment failure.
To ensure a reliable connection to earth, the International Electrical Testing Association specifies ground electrode testing every three years. We provide detailed analysis of ground by earth testing which ensure that current flow will find a safe path to earth.
Thermography
In Infrared Thermography, we use temperature as a parameter to monitor the condition of any machine in operating condition.
- Thermal Analysis of motors
- Thermal Analysis of Electrical system
- Thermal Analysis of bearings
- Tanks level sediment deposits
- Deposits in pipes
- Blockage of cooling channels
- Safety Valves
- Roof moisture / Building inspections
- Testing Turbine Blades for
- Boilers
- Heat Exchangers
- Electric motors testing
- Ultrasonic testing
- Ultrasonic thickness monitoring
- Eddy current testing
- Radio graphic testing
Distribution & Control Systems
Our services include:
- Developing and commissioning turn-key systems
- Remote Terminal Unit (RTU), Programmable Logic Controller (PLC), Distribution Control System (DCS)
- Human Machine Interface (HMI), configuration services, from simple operator interfaces to networked personal and server computer based software packages
- Alarm system software configuration including notification, acknowledgement and recording
- Communications testing, troubleshooting
- Field Commissioning Services
Electrical Engineering (Other Services)
Our other services of electrical engineering includes
- Electrical audit
- Energy audit
- Acceptance test of electrical equipment
- Electrical Inspections
- Electrical power distribution
- Standby power system
- Uninterruptible power system
- Lightning and surge protection
- Arc Flash Study
- Power system studies
- Grounding system
- Fire alarm system
- Lighting design
- Intelligent lighting control system
Electrical Instruments:
- Digital Earth Tester
- Energy Meter
- Function Generator
- Frequency Meter
- Frequency Counter
- High Voltage Generator
- Hi Pot Tester
- Loop Calibrator
- LCR Meter
- Insulation Tester
- Oscilloscope
- Phase Indicator
- Power Meter
- Power Supply Functions
- Resistivity Meter
- RCD Meter
- Multi Function Calibrator
- Tachometer (non-contact)
- AC/DC Power Supply
- Thermography
Services
Temperature
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Temperature Dryblock Calibrator, Make Ametek Jofra | Terperature Gauge | Ambient to 650 °C | -200 to 1300 °C | |||||||||
| Temperature Switch | ||||||||||||
| Temperature Transmitter | ||||||||||||
| Temperature Transduce | ||||||||||||
| Process Calibrator, Make Yokogawa, Japan CA-100 | Thermocouple | |||||||||||
| Resistance Temperature Detector (RTD) | ||||||||||||
| Thermister | ||||||||||||
| Temperature Controller | -200 to 1300 °C | |||||||||||
| Temperature Indicator | ||||||||||||
| Hot Plate | ||||||||||||
Pressure
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Pressure calibrator, Make Druck | Pressure Gauge | -1 to 700 bar -14 to 10000 Psig |
-1 to 700 bar -14 to 10000 Psig |
|||||||||
| Pressure Switch | ||||||||||||
| Pressure Trnasducer | ||||||||||||
| Pressure Transmitter | ||||||||||||
| D/P Transmitter | ||||||||||||
| Force Gauge | ||||||||||||
| Pressure Modules | ||||||||||||
| Pressure Indicator | ||||||||||||
| Pressure Controller | ||||||||||||
Flow
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Flow Meter | Flow Switch | In Process | In Process | |||||||||
| Flow Meters | ||||||||||||
| Flow Indicator | ||||||||||||
| Flow Controller | ||||||||||||
| Flow Transmitter | ||||||||||||
Level
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| HART Communicator Laser Distance Meter |
Level Transmitter | 0 to 40 Meter | ||||||||||
| Level Switch | ||||||||||||
| Level Indicator | ||||||||||||
| Level Probes | ||||||||||||
Load/Weight/Force
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Dead Weights | Weighing Scale | up to 2000 kg | up to 100 kg | |||||||||
| Weighing Indicator | ||||||||||||
| Batching Plant | ||||||||||||
| Weight Bridge | ||||||||||||
| Filling Machine | ||||||||||||
| Filling Hopper | ||||||||||||
| Electronic Scale | ||||||||||||
| Laboratory Scales | ||||||||||||
Dimensional Measurement
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Gauge Block Set Digital Laser Range Meter |
Vernier Calipers | up to 600 mm by Block up to 60 M by Laser |
up to 300 mm ang 60 M | |||||||||
| Micro Meter | ||||||||||||
| Dial Gauge | ||||||||||||
| Height Gauge | ||||||||||||
| Depth Gauge | ||||||||||||
| Ultrasonic Thickness Gauge | ||||||||||||
| Feeler gauge | ||||||||||||
| Surface Profile Gauge | ||||||||||||
| Dial Bore Gauge | ||||||||||||
| Gauge Block Set | ||||||||||||
Noise/Sound Level
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Acqustical Caibrator Sound Level Meter |
Sound Level Indicator | 94, 114 dBa | 50 ~ 130 dBa | |||||||||
| Sound Level Meter | ||||||||||||
| Noise Analysis for Plant Locations | ||||||||||||
Environment
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Environment Analyzer LM-8000A |
Temperature Monitoring | N/A | Temp 20 to 60 °C R.H 10 to 90 % Light 20,000 lux Velocity 0.4 to 30.0 m/s |
|||||||||
| Relative Humidity | ||||||||||||
| Lux Level | ||||||||||||
| Wind Velocity | ||||||||||||
Electrical
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Digital Multimeter Digital Ampere Meter Process Calibrator |
Multimeters | Resistance 50KΩ Frequency 50 Khz |
Volta AD+DC 1000 Current AC+DC 1000 |
|||||||||
| Ohm Meters | ||||||||||||
| Ampere Meter | ||||||||||||
| Earth Tester | ||||||||||||
Coating Thickness Inspection
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Coating Thickness Meter and Reference Strips | Coating Thickness Gauges | 1000 µm | 1000 µm | |||||||||
Revolution / RPM
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Digital Tchometer | Rotary Equipment | 2 rpm to 99,999 rpm | ||||||||||
| Tachometer | ||||||||||||
| Motor Shofts | ||||||||||||
Analyzer
| Reference Standard / Equipment | Scope | Range | ||||||||||
| Source | Measure | |||||||||||
| Reference Buffer Solutions | pH Meter | Misc. | Misc. | |||||||||
| Conductivity Meter | ||||||||||||
| ORP Meter | ||||||||||||
| Refractometer | ||||||||||||
Instruments:
Pressure:
- Pressure, Vacuum, Compound Gauges
- Pressure Calibrators
- Pressure Switches
- Pressure Transmitter
- Pressure Transducer
- Dead Weight Tester
- Pressure Switch
- LRV, TRV Calibration
Temperature:
- Temperature Controller / Indicator
- Temperature Sensor (RTD, Thermocouple)
- Temperature Transmitter
- Temperature Calibrator (liquid & dry block)
- Temperature Recorder (Chart/Digital)
- Thermo Switch / Thermostat
- Thermometer (Glass/Digital/Wet, Dry &IR)
- Bi-Metal Thermocouple
- Pyrometer
- Thermistor
Services
- Weighing Balance
- Weights/Weight Box
- Cable Tension Meter
- Durometer
- Force Gauge
- Gram Gauge
- Hardness Machine
- Hardness Meter
- Load Cell
- Masses
- Push/Pull Gauge
- Pocket Balance
- RPM Meter
- Rubber Hardness Tester
- Spring Balance
- Speed Indicator
- Stroboscope
- Tension Gauge
- Tachometer
- Torque Driver
- Torque Checker
- Torque Dial
- Torque Gauge
- Torque Wrench
- Standard Weights
Services
- Security System CCTV Cameras Installation
- Fire & Gas System.
- Electrical Heat Tracing (EHT) system Installation.
- Instrument Installation Testing and Commissioning.
- Trouble shooting of Control Systems.
- Installation of Fire Fighting System.
- Erection of Piping.
- Erection of Steel Structure.
- Lighting Infrastructure.
- Security System (CCTV Installation)
- Plant Earthing System.
- Services of Post Weld Heat Treatment System.
- Installation of MCC, PLC, DCS, ACR, Control Systems,
- Sand Blasting and Painting
- Solar system Installation.
Services
Solar Engineering Reports
Providing review of the proposed solar project’s contractual documents with an evaluation of the technical design to verify compliance and ability to meet contractual obligations.
- Document Cost Review (DCR)
- Pre-Qualification document (PQD)
- Contractor Evaluation (CE)
- Financial Analysis (FA)
Solar energy projects Consultancy & EPC
- Consultancy & designing
- Engineering , procurement & Construction (EPC)
- Mechanical Completion Certificate (MC)
- Electrical Completion Certificate (SC)
- Final Completion Certificate (FC)
Owner’s Representation
- Designing appropriate Energy Solutions
- Managing Contractor Selection & Bid Process
- Managing Timelines & Schedules
- Optimizing Procurement & Financing Options
- Managing all Third-Party Communications
- Facilitating Client Training
Gratify Engineering offers the following services to its client.
- Feasibility Studies/PVSYST Simulation
- Project Management
- Supervision engineering
- Onsite Site Testing
The company has invested in all necessary equipment/tools needed to accomplish the abovementioned tasks; the detail is mentioned below:
- Full version of PVSYST 7 for Solar PV simulation purposes.
- AUTOCAD 2019/Google Sketchup for Layouts.
- MS Project for Project Management.
- MS Office and other necessary software.
- Python for evaluating complex data.
- Ret-screen for financial modelling.
- Homer for micro grid analysis.
The following equipment is also available for onsite testing:
- DMM
- Digital Clamp meter
- Earth Resistance Tester
- Cable Insulation tester
- Thermal Camera
- Portable Oscilloscope
- PV String and IV curve Taste
Our Projects
- Up gradation of Process Safety Systems PSS at Chevron Caltex.
- Erection of Plant Security Systems at Central Processing Facility Mol Pakistan.
- Erection of Plant Security Systems at Tolanj Processing Facility Mol Pakistan.
- Project Erection of Electrical Heat Tracing at Chevron Caltex Up gradation of Blanding System 18 Tanks and its Piping.
- Shutdown of Nashat Chunia Power Plant Calibration of all instruments and Equipment’s.
- Annual Turnaround of Saphair Baloki Power Plant Calibration of instruments and Equipment’s
- Renovation of Fire and Gas Systems Unit A and Unit B.
- Up gradation of Gas Turbine control system Mark II to Mark VI at Pakistan Petroleum Limited.
– Unit C
– Unit D
– Unit E
– Unit F
– Unit G - Fabrication and Installation of fence at Jacobabad Sports Complex.
- Shell Pakistan petrol pumps electric audit and inspection (Punjab + north reign)
- United detergent industry Lahore electric audit and inspection